Product Details:
Weight | Approx. 1 kg |
Condition | New |
Color | Charcoal with silver |
Is It With Microphone | With Microphone |
Current consumption | Less than 30 mA (plus less than 15 mA per keypad) |
Distortion | Less than 0.6percent (maximum input) |
Limiter threshold | 2 V |
Output impedance | 200 ohm |
Stem length with mic | 390 mm (15.35 in) |
Storage temperature | -40 oC to +70 oC (-40 oF to +158 oF) |
Relative humidity | Less than 95 percent |
Mounting | Standalone |
Base dimensions | 40 x 100 x 235 mm (1.57 x 3.97 x 9.25 in) |
Input sound level (max) | 110 dB SPL |
Nominal sensitivity | 85 dB SPL (gain preset 0 dB) |
Cable length | 5 m (16.4 ft) |
Operating temperature | -10 oC to +45 oC (14 oF to +113 oF) |
Compression ratio limiter | 120 |
Speech filter | -3dB at 315 Hz,high-pass,6 dB/oct |
Voltage range | 24 VDC supplied by LBB 1990/00 (or 18 to 24 VDC or VAC external power supply) |
Frequency response | 100 Hz to 16 kHz |
Gain preset | +6 / 0 / -15 dB |
Input noise level (equiv.) | 25 dB SPLA |
Nominal output level | 700 mV |
Priorities | 7 |
Chimes | Any wave file |
Features:-
Additional Information:
Product Details:
Brand | BOSCH |
Color | Charcoal |
Model Number | LBB1990/00 |
Impedance | 22 kohm |
Frequency response | 60 Hz to 18 kHz (+1/-3 dB at -10 dB ref. rated output) |
Output power (rms/maximum) | 240 W / 360 W |
Speech filter | -3 dB at 315 Hz,high-pass,6 dB/oct |
VOX trigger level | -20 dB (100 V mic / 100 mV line) or via input contact |
Distortion | Less than 0.1percent at 1 kHz |
Frequency at fs=11.025kHz | 100 Hz to 5 kHz (+1/-3 dB) |
Frequency at fs=24kHz | 100 Hz to 11 kHz (+1/-3 dB) |
Mounting | 19" rack |
Power consumption | 550 W |
Battery Power Voltage | 24 VDC,+/-15percent |
Battery Current max | 14 A |
Supervision DAC | 1 Hz pilot tone |
Supervision Flash ROM | Continuous checksum control |
Voltage | 230/115VAC,+/-15percent,50/60 Hz |
Weight | Approx. 21.17 kg |
Frequency at fs=8kHz | 100 Hz to 3.6 kHz (+1/-3 dB) |
Phantom power supply | 12 V (mic mode only) |
S/N (flat at min volume/ muted) | more than 75 dB |
Frequency at fs=16kHz | 100 Hz to 7.3 kHz (+1/-3 dB ) |
Number of messages | 255 max |
Sensitivity | 200 mV |
Dimensions (H x W x D) | 144 x 430 x 370 mm (19" wide,3U high) |
Frequency at fs=12kHz | 100 Hz to 5.5 kHz (+1/-3 dB) |
Limiter | Automatic |
Max power consumption | 600 VA |
Bass control | -8/+8 dB at 100 Hz |
Current inrush | 8 A |
Connector | Cinch,stereo converted to mono,unbalanced |
Recording / playback time | 1000 seconds at fs = 8 kHz,333 seconds at fs = 24 kHz |
Memory capacity | 16 MB Flash ROM |
Power reduction on backup power | -1 dB |
S/N (flat at max volume) | more than 70 dB |
Treble control | -8/+8 dB at 10 kHz |
Headroom | more than 25 dB |
Frequency at fs=22.05kHz | 100 Hz to 10 kHz (+1/-3 dB ) |
The Plena Voice Alarm Controller unit is the heart of the voice alarm system. It is the basis of the Plena Voice Alarm System, and has all the essential functionality for compliance with the EN 54 16 and EN 60849 standards, including full system supervision, loudspeaker line impedance supervision, a supervised emergency microphone on the front panel and a supervised message manager.
The messages can be merged to allow even more flexible use of pre-recorded announcements and evacuation messages. The controller can be used as a standalone system with up to six zones, or expanded to up to 120 zones using additional six-zone routers. Up to eight call stations can be connected. Interconnections are made using standard RJ45 connectors and shielded CAT-5 cable.
A built-in 240 W amplifier provides the power for the emergency call channel and BGM. Additional Plena Amplifiers can be added to provide two-channel operation. All amplifiers are supervised. The audio output uses standard analog audio 100 V line switching for full compatibility with the Plena family of public address equipment and Bosch EVAC-compliant loudspeakers. The system is configured using DIP switches for basic functionality and a PC for more advanced functions.
Functions:
The controller has two BGM source inputs and a mic/ line input with configurable priority, speech filter, phantom power and selectable VOX activation. A total of 16 priority levels can be specified for microphone, call stations and trigger inputs for optimum system flexibility.
The powerful 240 W output section has six transformer-isolated 100 V constant-voltage outputs for driving 100 V loudspeakers in six separate zones. The 100 V-technique reduces line losses on longer distances and provides easy parallel connection of multiple loudspeakers. All zones may be individually selected from the front panel, and the BGM output level in each zone can be individually set in six steps. The controller supports A/B wiring.
Configuration software is provided on the CD included with the unit. The CD also includes many useful programs, such as MP3-ripping software, a sample- rate converter, various audio and visual tools, and free, MP3-coded music.
The amplifier output is also available as a separate output on 100 V and 70 V. A separate 100 V call-only output provides addressing for an area where BGM is not required but where priority announcements are. Six configurable volume-override output contacts are available for overriding local volume controls during priority calls. Both four-wire and three-wire schemes are supported. An LED meter monitors the output.
Up to 255 messages can be stored in the internal 16 MB flash ROM, without a need for battery backup. Each message can have any length within the total available capacity. Messages and configurations are uploaded from a PC via USB 2 into the memory, after which the unit operates without a PC connection. The standard WAV-format is used for the messages, and sample rates of 8 kHz up to 24 kHz with 16-bit word length (linear PCM) are supported. This gives up to 17 minutes of recording time with CD-quality signal-to- noise ratio.
The unit has 12 contact trigger inputs for business and emergency (EMG) calls. Each can be configured for a message consisting of a sequence of up to eight wave files. In this way some wave files may be used in various combinations with other messages, optimizing flexibility and the amount of storage space used . Multiple messages can be merged to form one integrated message. A zone selection, together with this sequence can be configured for each trigger input.
Additional Information:
Product Details:
Brand | Bosch |
Color | Charcoal |
Mounting | Standalone, 19" rack |
Volume override types | 3-wire, 4-wire (24 V), 4- wire failsafe |
Relative humidity | Less than 95 percent |
100 V input Amp 2 | 100 V / 0 V |
Main Voltage | 230/115 VAC, +/-10percent , 50/60 Hz |
Storage temperature | -40 oC to +70 oC (-40 oF to +158 oF) |
Battery Current max | 1.8 A |
Trigger Inputs | 12 x (6 EMG, 6 business) |
Loudspeaker outputs | 12 x (2 x 6 zones) |
Dimensions (H x W x D) | 88 x 430 x 260 mm (19" wide, 2U high) |
100 V input Connector | MSTB 2,5 /16-ST |
100 V input Amp 1 | 100 V / 70 V / 0 V |
Rating | 250 V, 7A, voltage free |
Activation | Programmable |
Max power consumption | 50 VA |
Battery Voltage | 24 VDC, +/-15percent |
Supervision | On EMG inputs, programmable |
Inrush current | 1.5 A 230 VAC / 3 A 115 VAC |
Supervision method | Series / parallel resistor |
Connector | MC 1,5/14-ST-3,5 |
General purpose relays (2x) | NO / COM |
Weight | Approx. 3 kg |
Idle / max load current | 0.2 A / 0.3 A |
Typical / max load current | 0.51 A / 1.5 A |
Connectors | MSTB 2,5 /16-ST, floating |
100 V input Power handling capacity | 1000 W |
100 V output | 700 W rated per zone |
Operating temperature | -10 oC to +55 oC (14 oF to +131 oF) |
Additional Information: